Embossing of a screw thread and TCP granules enhances the fixation strength of compressed ACL grafts with interference screws
Farshad, Mazda ; Weinert-Aplin, Robert ; Stalder, Michael ; Koch, Peter ; Snedeker, Jess ; Meyer, Dominik
In: Knee Surgery, Sports Traumatology, Arthroscopy, 2012, vol. 20, no. 2, p. 268-274
Ajouter à la liste personnelle- Summary
- Purpose: Fixation of soft tissue grafts with interference screws relies on the friction of the graft between the screw and the bone tunnel. The goal of this study was to precondition such grafts by mechanical compression in order to reduce anticipated and undesired viscoelastic adaptation of the graft to screw pressure. Further, the otherwise slippery graft surface was modified with impressed tricalcium phosphate granules (TCP) to improve friction and mechanical hold. Methods: Fresh flexor digitorum tendons from young bovines were used to create bundles with a diameter of 8-9mm and were divided into 10 groups to compare the pullout strength and bone damage in a variety of construct scenarios. Specifically, the effects of graft precompression to reduce preimplantation graft diameter were investigated. Further the effects of impressing TCP granules and/or a screw thread into the tendon surface during the compression process were studied. Results: In sawbone tests, radial graft compression allowed for a smaller bone tunnel (7mm), but resulted in a significantly lower pullout strength of 174N (95% CI: 97, 250), compared with controls [315N (204, 426)]. In contrast, TCP coated [402N (243, 561)], screw embossed grafts [458N (302, 614)], and the combination of TCP and embossing [409N (274, 543)] achieved higher pullout strengths when compared to the standard technique. In porcine bone, untreated grafts using an 8mm screw pulled out at 694±93N, significantly higher loads were required to pullout compressed grafts with or without TCP coating (870±74 and 878±131N), yet fixed with a 7mm screw. Conclusion: Modification of the tendon graft surface has a large influence on the biomechanical performance of interference screw fixation and results in less bone damage inflicted during insertion to a smaller tunnel diameter, while simultaneously achieving superior pullout strength